Enquiry List|E-mail|Sitemap

Product Categories
Contact Us
PLC CNC four column sliding hydraulic press
Product Description

Applications:

 
1. It is suitable for the press fitting and stretch forming of metal and plastic products as well as the movements of coining and overprinting.

2. It mainly applies to the fields of machine tool, engineering machinery, bearings, washing machine, automobile parts, motor components and powder metallurgy.

3. It is suitable for the molding of plastic products, such as DMC and BMC.

4. The machine, with a high degree of automatization, is particularly suitable for the mass production of parts. And it can be used as assembly line with several such equipment.

 
Description:

1. HP Series Frame-type Hydraulic Press is a kind of multifunctional precision machine which has high speed.

2. Optimized design, the frame is entirely welded with steel plates, and treated to relive stress by tempering for high precision.

3. Cartridge valve equipped for hydraulic control system, reliable, durable and less hydraulic shock, shorter connection pipeline and fewer release points.

4. Centralized button control system, with adjustment, hand and semi-auto operation modes at operator's choice (set-stroke single and set pressure single).

5. Four-angle and eight-side guide rail in high precision and with strong capacity against deflection, concentrated lubrication.

6. New type of oil cylinder sealing components marked by high reliability and long service life.

7. Sliding blocks operating in high speed, ensuring high efficiency.

8. The slide operating pressure, no-load quick travel and low-speed movement can be adjusted according to technological requirements.

9. Hydraulic cushion is fitted beneath the worktable; adequate knockout hole and hydraulic cushion are prepared on the plate of worktable with the operating modes including drawing, ejection and no ejection.

10. The working speed of this equipment is 3 to 4 times faster than that of Y41. It employs eight-side guide device and ejecting device, which can automatically eject workpieces with accurate guiding and fast speed.

11. The drawing device can be added to this equipment in order to change moulds easily. But the stretching of large metal parts needs to add hydraulic cushion to this equipment.
 

units
HP-100F1
HP-150F1
HP-200F1
HP-250F1
HP-315F1
HP-500F
kn
1000
1500
2000
2500
3150
5000
Mpa
31.5
31.5
31.5
31.5
32
32
mm
300
300
300
300
400
500
mm
860*560
630*560
870*670
670*645
970*700
700*700
1090*800
800*800
1090*800
800*800

1640*1200
1200*1400

mm
700*1000*
1900
1100*700*
1150
800*1000*
2100
1100*700*
1200
800*1000*
2200
1100*700*
1200
1300*1000*
2200
1100*700*
1300
1300*1000*
2200
1100*800*
1500

1600*1350*

2950
1400*800*

1500

kg
2200
2600
3100
4200
4600
9600

 

Zaozhuang Make Machinery Co., Ltd.,
Tel.: +86-632-5115110    FAX: +86-632-5115112Email:info@makemachinetools.com
Address: No.9 Lunan Shuicheng, No.1 Xichang middle road, Shizhong, Zaozhuang, Shandong, China
Home|About us|Products|Typical Case|News|Contact us|Sitemap
Copyright © Zaozhuang Make Machinery Co., Ltd., All rights reserved Technical Support:瑞诺国际