Zaozhuang Make machinery Co.,Ltd. power press operation attention(1)

Zaozhuang Make machinery Co.,Ltd. power press operation attention(1)

Before work

(1) check the lubrication of each part and make sure that all lubricating points are fully lubricated

(2) check whether the mold is installed correctly and reliably;

(3) check whether the compressed air pressure is within the specified range

(4) check whether the switch button is sensitive and reliable. The motor can only be started after the flywheel and clutch are disengaged;

(5) make the press carry out several idle strokes, and check the working conditions of the brake, clutch and control part

(6) check whether the main motor has abnormal heating, abnormal vibration, abnormal sound, etc

(7) use the manual oil pump to add lithium ester oil to the slide block

(8) check and adjust the roller clearance of feeder to the process requirements

(9) check and keep the oil quantity of the oil mist eliminator meet the specified requirements

(10) when the motor starts, check whether the flywheel rotation direction is the same as the rotation mark.

The power press produced by Zaozhuang Make Machinery Co., Ltd. has stable structure, high work efficiency, high safety coefficient and saves labor cost.

Now we have JH21-63, JC21S-25, JC21-40, JB23-16 and so on.

Welcome to consult and purchase!