Home > News > Company News

Five tips of fiber laser cutting machine

May. 28, 2020
Five tips of fiber laser cutting machine
1) The dual focus laser cutting head is a vulnerable object on the laser cutting machine, which is damaged by long-term use.
2) Every six months, check the straightness of the optical fiber laser cutting machine track and the perpendicularity of the machine, and timely maintain and debug in case of any abnormality. Without this, it is possible that the cutting effect is not so good, and the error will increase, affecting the cutting quality. This is the most important thing to do.
3) Once a week, use a vacuum cleaner to suck out the dust and dirt in the machine. All electrical cabinets shall be closed and dustproof.
4) Check the steel strip of the optical fiber laser cutting machine frequently to ensure the tension. Otherwise, if there is a problem in operation, it may hurt people and even cause death. The steel belt looks like a small thing, but it's still a bit serious when something goes wrong.
5) The guide rails of the optical fiber laser cutting machine shall be cleaned frequently to remove dust and other sundries, and the rack of the equipment shall be wiped and lubricated frequently to ensure lubrication without sundries. The guide rail shall be cleaned and lubricated frequently, and the motor shall also be cleaned and lubricated frequently, so that the machine can move better and cut more accurately in the process of moving, and the quality of the cut products will be improved.
The fiber laser machine produced by Zaozhuang Make Machinery Co., Ltd. can cut carbon steel, stainless steel, copper, aluminum and other materials with the method of laser cutting. It can cut the carbon steel with the thickest 25 mm. If you are interested in our products, you can come to consult us!

1.jpg

Copyright © Zaozhuang Make Machinery Co., Ltd. All Rights Reserved. | Sitemap |Powered by: REANOD

  • wechat

    +86 189 0632 5332: +86 189 0632 5332

  • wechat

    +86 178 6086 6228: +86 178 6086 6228