Maintenance of hydraulic press

1. The personnel of the hydraulic press shall have corresponding qualifications, and must be on duty with certificates. It is strictly prohibited to open and use the hydraulic press for the personnel who do not know about the machine.

2. Wear labor protection articles before work.

3. Before starting the machine, check the following items: whether the photoelectric protection device is reliable, whether the travel switches are sensitive, and whether the fasteners are loose.

4. Clear the sundries on the worktable and mold, adjust the working pressure and the stroke of the slider, run the car for one to two minutes without load, and work only when everything is normal.

5. The adjustment handle on the machine has been adjusted properly at the time of delivery, and can not be adjusted at will by non commissioning personnel

Maintenance system

1. Carry out lubrication and maintenance according to the lubrication requirements of the machine.

2. Every year after the machine tool works, the hydraulic oil shall be discharged from the oil tank of the bed to clean the oil tank, and the filtered hydraulic oil shall be refilled. The oil volume shall be determined at the height of 3 / 4 of the oil level.

3. The oil filter net on the oil suction pipe must be cleaned or washed regularly.

5. Regularly check whether the handle, knob and key are damaged.

5. The motor must be kept clean, and the air inlet net cover of the motor must always be kept in good ventilation state, and shall not be blocked.

6. Oil, lubricate and scrub the machine tool 10 minutes before work every day.

7. It is strictly prohibited for non operators to operate the equipment, and it is necessary to stop the equipment when people leave the machine.

Zaozhuang Make Machinery Co., Ltd. produces many types of hydraulic presses, which can meet the different needs of customers, mainly including ordinary HP-100, HP-150, manual HP-100S, mobile cylinder HP-100M, HP-150M, C-type HP-100C, etc. welcome to purchase!