Operation process of gantry machining center

1. The operator should be very familiar with and master the performance and characteristics of gantry machining center machine. Ensure that in case of emergency stop switch, can quickly and effectively play a role to avoid accidents.

2. Wear labor protection articles according to regulations, and it is forbidden to operate the machining center with gloves.

3. When the equipment is working, remember not to touch the electronic switch with wet hands to avoid electric shock. Do not touch any moving parts by hand.

4. Do not place tools or non machined workpieces on gantry machining center or moving objects.

5. The working table next to the machine must be solid and should not be placed on moving parts.

6. When loading and unloading the workpiece, the machine should be stopped and the proper distance between the workpiece and the cutter should be kept. Please do not open the front door and the left and right protective covers when the machine is running to avoid personal injury.

7. After setting the tool, run it with dryrun to make sure the program is correct.

8. After power failure or emergency stop, the triaxial should be restored to its original position.

9. Do not remove the travel switch or any related parts of the protection switch without authorization.

10. Before finishing the work, the control power switch of the operation panel and the main switch of the electrical box should be turned off

Gantry machining center of Zaozhuang Make Machinery Co., Ltd. is a star product independently produced by Zaozhuang Make Machinery Co., Ltd., with models of XH2216,XH3216,XH3220,XH4220, etc., which can meet the different needs of customers. Welcome all new and old customers to consult and purchase!