Home > News > Company News

Operation specification of surface grinding machine

Nov. 13, 2019

Operation specification of surface grinding machine

(1) the operator must be familiar with the operation sequence and performance of the machine, strictly prohibit the use of equipment super performance.

(2) the operator must pass training, examination or pass the examination after the card mount guard.

(3) before starting up, according to the equipment lubrication chart for lubrication, check the oil mark oil level.

(4) check each handle, block, switch, knob, etc. Should ensure in the original position or required position.

(5) start the motor of lubricating oil pump and hydraulic oil pump, check and adjust the pressure of hydraulic system, the pressure of lubricating system, and adjust the disk.

6 manual grinding head lifting, horizontal movement of the table, drag plate shift, adjust the switch.

7 before the new installation of grinding wheel, should check whether there is a crack, gap, installation should be carried out secondary balance.Check the position of the diamond pen relative to the grinding wheel.

8 moving grinding head lifting mechanism, horizontal shift, adjust limit block, switch.

(9) check whether the hand grinding head is light, close the cooling nozzle, open the cooling pump, transverse feed opening position, the table reciprocating movement, start the grinding head motor, idling for 15 ~ 20 minutes, check the temperature rise of the grinding head spindle.

Attending stop, reciprocating movement stops, shut off the coolant nozzle for 2-3 minutes, turn off the grinding head motor, after the grinding head stops, turn off the hydraulic oil pump, lubricating oil pump and cooling pump motor.Turn off the machine control master switch, turn off the air switch of the electric control cabinet.

⑪ after cleaning machine, filling, according to equipment lubrication chart disk anointed with oil.Return handle switch, throttle, knob to original or off position.

Zaozhuang make machinery co., ltd can provide surface grinding and milling machine for grinding and milling various types of automobile engine cylinder body and cylinder face, existing 3M9735B*130,3M9735B*150, also welcome new and old customers to come to purchase.


Copyright © Zaozhuang Make Machinery Co., Ltd. All Rights Reserved. | Sitemap |Powered by: REANOD

  • wechat

    +86 189 0632 5332: +86 189 0632 5332

  • wechat

    +86 178 6086 6228: +86 178 6086 6228

Chat with Us