Precautions for operating laser cutting machine

The precautions for operating the laser cutting machine are as follows:

1. observe the safety operation rules of general cutting machine. Start the laser strictly according to the starting procedure of the laser, adjust the light and test the machine.

2. Operators shall be trained, familiar with cutting software, equipment structure and performance, and master relevant knowledge of operating system.

3. Wear labor protection articles as required, and wear protective glasses that meet the requirements near the laser beam.

4. Do not process a material before making sure whether it can be irradiated or cut by laser, so as to avoid potential danger of smoke and steam.

5. When the equipment is started, the operator shall not leave the post or be entrusted to be managed without permission. If it is really necessary to leave, the operator shall shut down or cut off the power switch.

6. In case of any abnormality during the processing, the machine shall be shut down immediately, and the fault shall be eliminated or reported to the competent personnel.

7. Put the fire extinguisher in the accessible place; turn off the laser or shutter when not processing; do not place paper, cloth or other inflammables near the unprotected laser beam.

The laser cutting machine produced by Zaozhuang Meike Machinery Co., Ltd. can cut carbon steel, stainless steel, copper, aluminum and other materials with the method of laser cutting. It can cut the carbon steel with the thickest 25 mm. If you are interested in our products, you can come to consult us!