Slotting machine troubleshooting method
Customers may encounter various problems when using slotting machines. Zaozhuang Make Machinery Co., Ltd. has compiled the following faults and solutions for our customers for your reference:
Common troubleshooting methods for slotting machines by Zaozhuang Make Machinery Co., Ltd. :
1. There are obvious ripples on the working surface
Reasons: (1) The pressure plate gap is large; (2) The rocker swings are not parallel; (3) The tool is loose
Remedy: (1) Adjust the gap between the rocker arm and the slide rail and guide rail; (2) Repair or adjust the gap between the rocker; (3) Check the knife row and cutter
2. The temperature of the ram rises;
Reasons: (1) The ram is blocked when moving (2) The pressure plate is too tight
Remedy: (1) Repair the pressure plate (2) Repair the surface of the guide rail and rocker
3. The ram reversal has an impact
Reasons: (1) The rocker hole is not concentric with the support hole (2) The matching clearance of the rocker is too large
Remedy: (1) Repair the support hole and keep it concentric with the rocker (2) Reduce the clearance of each hole
4. The workbench is not moving smoothly
Reasons: (1) The clearance between the knife mechanism and connecting rod is too large (2) The ratchet wheel and pawl are worn
Elimination method: (1) Repair the hole matching, restore the standard clearance (2) Repair and replace the ratchet wheel and pawl
5. The geometric accuracy of the processed parts is out of tolerance
Reasons: (1) The gap between the pressure plate and the ram (2) The accuracy of the contact between the ram and the guide rail is poor (3) The ram is not perpendicular to the work surface when it is running
Remedy: (1) Adjust the gap of the pressure plate (2) Repair the guide rail (3) Adjust the level of the bed, repair the guide rail of the machine tool
The slotting machine models produced by Zaozhuang Make Machinery Co., Ltd. are XC-100, XC-125, and accessory slotting heads SL-100, SL-125. Thank you for choosing our products!