Home > News > Company News

Three factors affecting the execution speed of C type hydraulic press

Dec. 02, 2020

Three factors affecting the execution speed of C type hydraulic press

In the process of using the C type hydraulic press, it is found that the speed of the hydraulic press is unstable. What is the relationship between the speed of the hydraulic press and the speed of the hydraulic press. The following on the C type hydraulic press this problem to you in detail.

C type hydraulic press is a kind of mechanical equipment which uses hydrostatic pressure to process various materials. It is commonly used in pressing process and pressing forming process, such as forging, stamping, cold extrusion, straightening, bending, flanging, sheet metal drawing, powder metallurgy, press fitting, etc. It is one of the indispensable mechanical equipment in production and processing.

The execution speed of C type hydraulic press will be affected by the following points:

1. In the hydraulic system of C type hydraulic press, when the three position four-way reversing valve is in the middle position, the oil path to the hydraulic cylinder is cut off, and the two chambers of the hydraulic cylinder are interconnected and the oil return circuit is connected. When the hydraulic pressure of the other part of the oil tank is not stable due to the back pressure of the oil tank, when the oil pressure of the other part of the oil tank is not stable.

2. In the double rod hydraulic cylinder, the speed of C type hydraulic press will be unstable due to the different leakage of two chambers and the different friction resistance of reciprocating motion.

3. The hydraulic system design of C type hydraulic press is not perfect, the selection of components does not match, the throttle channel is blocked, the internal and external leakage of the system is serious, excessive air enters into the oil, and the friction resistance changes, etc., which will also cause the speed instability of the actuator at low speed, and even creep phenomenon.

The above are the three factors that affect the execution speed of the C type hydraulic press. In this regard, we should remind our customers: in our daily life, we should pay more attention to the three factors of the speed of the C type hydraulic press, and timely maintain the C type hydraulic press, so as to avoid failure in the use process and cause unnecessary losses to customers.

Zaozhuang Make Machinery Co., Ltd. is a company specializing in the production of hydraulic press equipment, C-type hydraulic press, four column hydraulic press, gantry hydraulic press, hydraulic bending machine and other styles, HP-63C, HP-100, HP-150, HP-200 and other models can be selected. We support customers to customize the model, welcome new and old customers to buy!

kc400.jpg


Copyright © Zaozhuang Make Machinery Co., Ltd. All Rights Reserved. | Sitemap |Powered by: REANOD

  • wechat

    +86 189 0632 5332: +86 189 0632 5332

  • wechat

    +86 178 6086 6228: +86 178 6086 6228