During the use of the gantry milling machine, the precautions are as follows:
1. The work object shall be clamped by pressing plate, screw or special tool. It is not allowed to add casing with general spanner to avoid slipping and hurting people.
2. The cutter must be clamped firmly, otherwise, it is not allowed to start the machine.
3. Before operation, check the operation of the transmission part of the machine tool and install the baffle of the machine tool before operation.
4. When milling various workpieces, especially rough milling, start to cut slowly.
5. When moving the worktable and tool holder, loosen the fixing screws first.
6. When loading and unloading the cutter, use a copper hammer or mallet to tap gently to prevent the cutter fragments flying out and hurting people.
7. During cutting, it is not allowed to change speed and adjust the tool, and it is not allowed to touch or measure the workpiece by hand.
Zaozhuang Make Machinery Co., Ltd.'s popular gantry milling machine models are X2014-20,X2014-40,X2016-30,X2020-30,X2025-40, etc. If you are interested in our products, welcome to consult us.