Countermeasures for the inefficiency of band sawing machine

Today, Zaozhuang Make Machinery Co., Ltd. will tell you how to improve the power of the sawing machine. Regarding the problem of the power of the sawing machine, on the one hand, the operator can operate well, and the operation has a great influence on the power. A good operator can make the sawing machine reach a good working condition, and the working power can also be very good. Make progress quickly. On the other hand, it is the problem of the sawing machine and the saw blade, the performance of the sawing machine and the selection of the saw blade. Therefore, in terms of improving the power of the sawing machine, the following methods can basically be followed:

1. The training of the sawing machine operator is very important. Only by knowing the various performances of the sawing machine in detail can you operate the sawing machine well. Correctly operating and adjusting the machine is the most important factor to ensure the service life of the band saw blade.

2. For the purchase of sawing machines and saw blades, select high-quality band saws. Good machine rigidity and operating performance can prevent the great influence of vibration and various stresses on the band saw blade. And correctly choose the band saw blade you will use. According to the material to be cut, select the appropriate saw blade width, tooth profile and tooth pitch.

3. Correctly use the sawing parameters of the sawing machine, which mainly include the saw band linear speed, feed rate, saw band tension and so on. The ideal chips should be tightly rolled, silver, and have a warm hand when sawing data. If there are sintered, brownish-blue, thick or powdery chips, the relevant parameters need to be adjusted. The correct use of cutting fluid and its mixture can lubricate and cool the band saw blade and clean off the attachments on the saw teeth in time.

4. Correctly "run-in" the new band saw blade. Regarding the use of the new saw blade, "run-in" is very important. Correct operation can effectively extend the service life of the band saw blade. "Running-in" is to remove the tooth edge burrs through the natural wear of the saw teeth, so that the band saw blade gradually enters the normal sawing state, and avoids premature chipping and curling of the saw teeth, especially for profiles, pipes and special-shaped materials with sharp cross-sectional changes. Time is especially important.

The band sawing machines GHS4228, GHS4235, BS-260G, etc. produced by Zaozhuang Make Machinery Co., Ltd. are now on sale!